Differences

This shows you the differences between two versions of the page.

--- palloframe [2024/09/09 12:43] – old revision restored (2024/07/01 12:59) admin
+++ palloframe [2024/09/09 12:44] (current) – old revision restored (2024/09/09 12:34) admin
@@ Line 5: / Line 5: @@
 Pallo is "a ball" in Finnish. It is a fitting name for something that has 95.4% sphericity.
-PalloFrame is designed and manufactured by DEV Joni. Available at Shop Dev Joni:
+PalloFrame is designed and manufactured by DEV Joni. Available at Shop Dev Joni.
-[[https://devjoni.com/shop/frames-c-4/palloframe-c-12/]]
 ===== Models =====
-PalloFrame currently comes in 3 different main models
+PalloFrame currently comes in 3 different main sizes
   * L10 - The standard model
-  * L5 - A mini model for space constrained settings
+  * L5 - A mini model for space constrained scenarios
-  * L20 - When big space is more important than structural strength and rigidity
+  * L20 - When massive inner space is more important than structural strength and rigidity
 The main difference between the models is their base pieces' side length - 10, 5 and 20 cm, respectively. The larger models have also more bolt and nut inserts.