SimpleLED Mini
For bright continious operation
Cheapest shipping from 10 €
Stock Status:
22 pcs
Delivery Status: 5-30 days
Manufactured on-demand
Description
SimpleLED Mini is a constant-current driver that delivers continuous, bright light output. Flicker-free.
Tiny size and affordable pricing make SimpleLED drivers a great fit for many scenarios They use the same R30 LED Emitters as our other drivers - See them here.
How to Run
- Connect the two wires into a 5 to 14 V power supply and the LED will light up
- If needed, use a mechanical or electronic switch to turn the LED on and off. Quick on-off switching can be used to dim down the LED
- Mini: The two M3 sized holes with 10 mm spacing, on both sides, can be used for mounting
Product Variants / Brightness
Please select the wanted Ohm rating ie. the resistance before ordering. You likely would like to have one of these:
- Mini 82 - Bright continuous operation
- Mini 164 - Still bright but less heat and energy use
These are much dimmer variants for special use cases
- Mini 1k
- Mini 10k
- Mini 100k
- Mini 1M
These are super bright variants that cannot stay on for long because they will for sure burn the LED and likely melt themselves
- Mini 10 - Flash on up to a second or so
Finally there is a specialty model
- Mini NA - No resistive element inside the LED. Add your own resistor or connect to another LED driver.
Technical Data
| Driver type | Resistive single-element |
| Resistivity | +-5% |
| Form-factor | Profile |
| Mount holes | Screw-in-plastic M3, 10mm apart |
| LED connector | R30 (devjoni) |
| Wires | Plus and minus |
| Wire ending | Push-in female, standard 2.54mm |
| Wire length | 50 cm +- 10% |
| Operation voltage | 5 - 14 V |
| Color | Black |
| Material | 3D-printed PET-G |
| Dimensions | 50 x 30 x ? mm |
| Weight | X g |
| Recommended ambient conditions | |
|---|---|
| Temperature | -20°C to +40°C |
| Humidity | 20% to 80% |