SimpleLED Profile
For bright continious operation
Cheapest shipping from 10 €
Stock Status:
18 pcs
Delivery Status: 5-30 days
Manufactured on-demand
Description
SimpleLED Profile delivers bright, flicker-free light output in a tiny form factor. It fits most common M3 aluminium profiles that usually are 10x10mm and 15x15mm.
Tiny size and affordable pricing make SimpleLED drivers a great fit for many scenarios They use the same R30 LED Emitters as our other drivers - See them here.
How to get started:
- Connect the two wires into a 5 to 14 V power supply and the LED will light up
- If needed, use a mechanical or electronic switch to turn the LED on and off. Quick on-off switching can be used to dim down the LED but too low switching frequency will create detectable flicker
- Profile: Connect with M3 nuts to your aluminium profile
Product Variants / Brightness
Please select the wanted Ohm rating ie. the resistance before ordering. You likely would like to have one of these:
- Profile 82 - Bright continuous operation
- Profile 164 - Still bright but less heat and energy use
- Profile 1k
- Profile 10k
- Profile 100k
- Profile 1M
- Mini 10 - Flash on up to a second or so
- Mini NA - No resistive element inside the driver. Add your own resistor or connect to another LED driver. Do not directly connect into a power supply.
Technical Data
| Driver type | Resistive single-element |
| Resistivity | +-5% |
| Form-factor | Profile |
| Mount holes | Places for M3 nuts |
| LED connector | R30 (devjoni) |
| Wires | Plus and minus |
| Wire ending | Push-in female, standard 2.54mm |
| Wire length | 50 cm +- 10% |
| Operation voltage | 5 - 14 V |
| Color | Black |
| Material | 3D-printed PET-G |
| Dimensions | X g |
| Weight | X g |
| Recommended safety limits | |
|---|---|
| Max flash time | Unlimited |
| Operation cycle | 100% |
| Recommended ambient conditions | |
| Temperature | -20°C to +40°C |
| Humidity | 20% to 80% |