PapaLink Medium Hub

8 socket

Cheapest shipping from 10 €
SKU: DEVJ-PAPALINK-H8X
Stock Status: 30 pcs
Delivery Status: 30-60 days
Pre-order item
50 €
Excluding Tax: 12.75 €
pcs

Description

This medium hub provides 8 PapaLink sockets.

You can use as the base hub by plugging in a power source, a controller and of course the devices you want to control. Or use it to extend the amount of sockets in your current bus by seven (one slot will taken by the connecting cable).

Contact us (solutions@devjoni.com) for customised needs: High-temperatures, low-temperatures, electrically shielded operation, higher currents.

Safety information

General electrical safety principles apply. Pay attention especially on the following factors
  • Never short-circuit the pins in the socket together. This may damage all other devices in the PapaLink bus.
  • Caution on extreme ambient conditions: At high temperatures above 35°C max-current capacity is considerably lowered. High humidity over 90% may condensation may occur causing several issues such as corrosion and short-circuiting.
  • Hubs can be connected to another hubs. Generally, however, avoid hub chains longer than three. Very long chains may degrade signaling performance and cause more power losses.

Technical Data

Type Standard
Sockets 8 PapaLink Female
Max-current 10A @ 25°C ambient
Color Black
Material 3D-printed PETG
Dimensions 114 mm x 75 mm x 35 mm
Weight X g
Recommended ambient conditions
Temperature -70°C to +40°C
Humidity 20% to 80%

Similar Products